Safety Hardware Supplier for Distributors
Snap hooks, carabiners, D-rings and buckles, G80 lifting components and stainless rigging hardware from one Taiwan manufacturer — for distributors building a range they can reorder with confidence.
A safety hardware supplier for distributors has to deliver three things: breadth, so one source covers many SKUs; consistency, so every reorder matches the lot that was approved; and documentation, so each lot can be traced. Power Honour is a Taiwan OEM/ODM manufacturer whose existing catalogue lists 609 products across 40 categories — snap hooks and connectors, carabiners, buckles and D-rings, G80 lifting components, lifeline systems and stainless rigging hardware — made with in-house forging, machining, heat treatment and surface finishing under ISO 9001. Importers, wholesalers and distributors can stock catalogue parts, put their own brand on them, or commission custom parts.
What a distributor needs from a manufacturer
A distributor carries the supplier's quality in front of its own customers. A price advantage is gone the first time a reorder arrives different from the lot that was approved, or a customer asks for a document nobody can produce.
One source for many SKUs
The existing catalogue runs to 609 products in 40 categories, from fall-arrest connectors and harness hardware to lifting components and stainless rigging. Fewer suppliers means fewer qualifications to run, fewer document sets to chase and fewer shipments to consolidate.
Reorders that match the approved lot
A reorder should come off the same tooling and the same heat-treatment recipe as the lot you approved. Forging, machining, heat treatment and surface finishing run in-house under one ISO 9001 system, so those variables stay with the people who made the first lot rather than with a subcontractor you never see.
Every lot answerable
Alloy, heat number and material supplier are documented from incoming material to the finished lot, and batch test records are kept against the lot. When one of your customers asks about one part, you can answer with the batch behind it instead of a reassurance.
The range at a glance
The existing catalogue lists 609 products across 40 categories. These are the groups most distributors of safety and rigging hardware draw on.
catalogue products in 1 category
catalogue products in 3 categories
catalogue products in 2 categories
catalogue products in 1 category
catalogue products in 5 categories
catalogue products in 7 categories
G80 lifting components sold in the US are commonly specified to ASTM A952, the specification for forged Grade 80 and Grade 100 lifting components. Tell us the specification your market requires: we manufacture to your drawing and test requirements, with certification testing by the accredited body you select. We do not claim certification to ASTM A952 ourselves.
Stock, private label or custom
Most distributors use more than one of these across a range. The question for each line is how much differentiation is worth paying for.
Catalogue parts as they are
The lowest-commitment way to add lines: parts already in production, with a production history behind them. The trade-off is that other distributors can buy the same part.
Browse the catalogue →Catalogue parts under your brand
The same proven parts, laser marked with your name and packed to your artwork. It builds your brand on the shelf without the cost and time of new tooling.
Private label programmes →Parts made to your drawing
An exclusive line on dedicated tooling, for the products where differentiation is worth the development, tooling and certification testing it takes.
How development runs →The document pack to ask any supplier for
Ask for these from every supplier, including us, before you list a part. What exists depends on the product and the standard behind it — not every part carries every document — but a supplier who cannot tell you which ones apply to a part is telling you something.
- Material certificates
- Mill test certificates that tie each lot’s alloy to its heat number, with measured chemical and mechanical results — an EN 10204 type 3.1 certificate or its equivalent, not a bare certificate of conformity.
- Test reports
- The type-test report for each part: who tested it, to which standard and edition, how many samples, and in which loading directions. Ask as well what is tested per production lot, and how those records are kept.
- Inspection records
- Dimensional and visual inspection results, and proof-load records where the standard requires them, held against the lot number marked on the part or its packaging.
- Instructions for use
- The user instructions and warnings for each product, in the languages of the markets you sell into. For fall protection equipment they are part of what makes the product saleable, not an optional insert.
Consolidating shipments
Distributors rarely order one SKU at a time, and freight is priced by volume and by shipment, not by the part. When individual lines are small, the freight cost per part is often decided by what else shares the shipment. Ask us about consolidating several SKUs into one shipment when you send an enquiry; whether it works for a given order depends on the parts, quantities and timing, and we will tell you when we quote.
Taiwan origin and US tariffs
Goods of Taiwan origin are outside the Section 301 duties that apply to goods of Chinese origin. That does not make them tariff-free: other US tariff measures can apply to Taiwan-origin goods, including Section 232 measures on steel, aluminium and derivative products, and those measures change often. We do not quote rates here because they would be out of date before you read them. Confirm the current position for each tariff classification with a licensed customs broker, and build it into a landed-cost model.
US law also requires imported articles to be marked with the English name of their country of origin — for our parts, Taiwan — as legibly, indelibly and permanently as the article allows, or on the container where the article itself is excepted.
Selling into both the US and Canada? The North America page covers the standards and labelling each market expects.
Product lines
Each line can be stocked as catalogue parts, supplied under your own brand through our private label programme, or used as the starting point for a custom part.
Snap Hooks
Forged double-locking lanyard hooks, rebar and scaffold hooks, swivel snap hooks and stainless snaps for fall protection and rigging.
View line →Carabiners
Aluminium, steel and stainless carabiners for climbing, work positioning and fall arrest, with screw-lock, twist-lock and triple-lock gates.
View line →Harness Hardware
D-rings, buckles, sliding adjusters and auto-release buckles for harnesses, belts and webbing assemblies.
View line →Rigging Hardware
G80 sling hooks, master and coupling links, plus stainless shackles, swivels, turnbuckles, quick links and wire rope clips.
View line →Related Insights
Wholesale Safety Hardware: Stocking, Private Label or Custom OEM?
Wholesale safety hardware can be sourced four ways: stock catalogue parts, private label on existing tooling, modify a catalogue part, or go fully custom OEM. Here is how each route shifts exclusivity, tooling and liability.
Read more →G80 Lifting Components: ASTM A952, ASME B30 and What Importers Check
G80 lifting components, the forged hooks, master links and coupling links in Grade 80 chain slings, are specified under ASTM A952 and used within ASME B30.9. Here is what the grade means and what to verify before stocking them.
Read more →Material Traceability and Mill Test Certificates: What to Ask For
Material traceability links a finished part back to the heat of metal it came from, and the mill test certificate reports that heat’s measured results. What EN 10204 3.1 means, and how to ask for it.
Read more →Landed Cost for Imported Metal Parts: What US Buyers Really Pay
Landed cost is the real cost of an imported metal part on your dock: unit price, freight, insurance, duty, brokerage and inland transport. Here is how to build the number before you compare quotes.
Read more →Minimum Order Quantities in OEM Manufacturing: What New Brands Need to Know
MOQ is one of the most confusing aspects of OEM manufacturing for new brands. We explain why MOQs exist, what drives them by process type, and how to think about pilot-run economics.
Read more →Common Questions
- Do you supply distributors, or only brand owners?
- Both. Importers, wholesalers and distributors work with us in three ways: stocking catalogue parts as they are, selling catalogue parts under their own brand, or commissioning custom parts made to their drawing for an exclusive line. Many combine all three across a range.
- Can several SKUs be combined in one shipment?
- Ask us about consolidating several SKUs into one shipment when you send an enquiry. Whether it works for a given order depends on the parts, quantities and timing involved, and we will say so when we quote. Consolidation matters to distributors because freight per part falls sharply when small lines share a container.
- What documents should I ask a safety hardware supplier for?
- Four sets: material certificates that tie each lot to its heat of metal, such as EN 10204 type 3.1; type-test reports naming the laboratory, standard and edition; inspection and proof-load records where the standard requires them; and instructions for use in the languages of your markets. Ask every supplier, including us, before you list a part.
- Are Taiwan-made products subject to US tariffs?
- Goods of Taiwan origin are outside the Section 301 duties that apply to goods of Chinese origin, but that does not make them tariff-free. Other US tariff measures can apply to Taiwan-origin goods, including Section 232 measures on steel, aluminium and derivative products, and those measures change often. Confirm the current position for each tariff classification with a licensed customs broker before you build a landed-cost model.
- How do I know a reorder will match the parts I approved?
- Ask how the supplier holds the process. At Power Honour, reorders are made on the same tooling and heat-treatment recipe as the approved lot, forging, heat treatment and surface finishing run in-house under ISO 9001, and material and batch test records are kept against each lot. Whoever you buy from, agree that process changes are notified before a changed lot ships.
- What is the minimum order quantity for distributors?
- It depends on the part and the route. Catalogue parts already in production carry different economics from a private label run or a custom part with its own tooling. We quote against the specific SKUs, quantities and annual volume you expect rather than a single figure.
Send us your line list
Tell us the SKUs you stock today or want to add, the standards your customers ask for and the volumes you expect. We will come back with what we already make, what we would adapt, and the documents behind each part.